Neilmed Sinus Rinse Nasadock Drying Stand Kit- 1 Ea - 277889
Neilmed Sinus Rinse Nasadock Drying Stand Kit- 1 Ea - 277889
Neilmed Sinus Rinse Nasadock Drying Stand Kit- 1 Ea - 277889
Neilmed Sinus Rinse Nasadock Drying Stand Kit- 1 Ea - 277889
Neilmed Sinus Rinse Nasadock Drying Stand Kit- 1 Ea - 277889

Neilmed Sinus Rinse Nasadock Drying Stand Kit- 1 Ea

Item #: 277889
Retail: $5.32 Price: $2.94
You Save: $2.38 (44.7%)




    Quantity:
    NeilMed Sinus Rinse NasaDock drying stand Kit

    The NasaDock Plus drying stand offers the ideal drying and storage solution for your Sinus Rinse squeeze bottle system or NeilMed Neti Pot. Use the drying device to reduce the chance of contamination.

    The convenient holder can store a months supply of premixed Sinus Rinse Nasal Wash packets.

    Uses:

    A simple hygienic way to air dry and neatly store the SINUS RINSE bottle, cap and tube.

     

    Features:

    • Offers the ideal drying and storage solution for your Sinus Rinse squeeze bottle system or NeilMed Neti Pot.
    • Convenient holder can store a months supply of premixed Sinus Rinse Nasal Wash packets.
    • Reduce the chances of contamination.
    • For Screw Mounting Method :
      • Use the printed template on the side of the box to mark location of holes for the mounting screws. You may use tip of the screws to mark your points.
      • For dry wall mounting, drill a pilot hole in each of the marked positions using the appropriate size drill bit. Now tap in the anchor until approximately 2/16 in. is still protruding out of the wall. You may mount the provided screws directly in to the wooden stud at each location and in this case do not use the anchors.
      • Now affix the unit to the wall using the two keyholes at the back of the unit.
    • Double-Sided Tape Mounting :
      • Using the provided double-sided tape, peel the protective layer off one side of the tape and adhere it to the back of the unit.
      • Clean and dry the area where the holder is going to be mounted. Make sure the surface is both flat and smooth.
      • Mark the position with a pencil. Remove the other protective layer from the exposed side of the tape and adhere the unit to the desired position on the wall by pressing firmly on the wall. For the best adhesion, do not use it for a day.
    • Suction Cup Mounting:
      • Using the provided suction cups, affix the mushroom head of the suction cups to the keyhole at the back of the unit.
      • Clean and dry the area where the holder is going to be mounted. Make sure the surface is a non-porous flat surface.
      • Moisten the suction cups and firmly affix the unit to the desired position on the wall.
    Shipping Weight : 0.90 lb
    View All Brands
    Product descriptions and images presented on the site are for representational use only and do not constitute or substitute for medical information from your health care or medical professional. Information on this site is provided for informational purposes only. You should read carefully all on correct product packaging and follow the instructions. If you have or suspect that you have a medical problem, promptly contact your health care provider. Information and statements regarding dietary supplements on this site have not been evaluated by the Food and Drug Administration and are not intended to diagnose, treat, cure, or prevent any disease and may be for commercial. Image shown for reference only. Actual item you recieve may differ from shown.
    Copyright © 2008 . All Rights Reserved by AmericaRx.com Online Health and Beauty. Terms & Conditions Apply.